Ligna PRONTO Naturel- Monocoat oil for wooden furniture, walls & Woodwork 237ml


13 in stock (can be backordered)

SKU: LIG.PRONTO.237ml Category: Tag: [social_share_list]

*** Professional Tip *** PRONTO oil can be easily applied to all types of hardwood, domestic and exotic. You can add a second coat on surfaces used more intensively such as floors. The durability will be increased and the surface will be shinier. All interior wood surfaces can be finished with LIGNA PRONTO monocoat oil.


The surface must be clean and free of wax and varnish residue. Make sure the product is at room temperature before application.

Mix before applying. Sand wood with 100-120 grit sandpaper. Remove dust with a clean, dry, WHITE COTTON RAG. Keep PRONTO at a temperature above 15 °C.

For high-density wood, such as maple or exotic wood, moisten with a clean mop or damp WHITE COTTON RAG. When surface is completely dry (about 2 hours), sand gently with 220 grit sandpaper to break down the wood’s fibre. Remove dust.


Apply a thin coat with a clean and dry WHITE COTTON RAG, a PAD PAINTER, or an APPLICATOR PAD. After 15 to 20 minutes maximum, wipe along the wood grain to help penetration and remove excess oil.

Optional – To soften the surface and increase lustre by 20%, polish with a white nylon pad between 2 and 36 hours after application.

  • After 6-9 hours: moderate and careful use;
  • After 2-3 days: regular use;
  • After 10 days: maintenance with LIGNA products.




Only one coat is required. However, two coats will increase lustre and the colour by 20%.

Wait 24h for a second coat.

WARNING: On low density woods such as pine, we recommend two coats to seal the wood correctly.

Optional – To soften the surface and increase the 20% of the lustre, polish with a white nylon pad between 2 and 36 hours after application.


150-300 sq. ft./litre according to the wood type.



Use LIGNA SOLIA and SOLIA+ soap for oiled surfaces.

Wait 10 to 15 days for the surface to be well sealed before it comes into contact with water.